Solenoid Valves and Angle Seat Valve Solutions – Fluscon https://fluscon.com Fluid Control Systems Tue, 06 Dec 2022 10:18:53 +0000 en-GB hourly 1 https://wordpress.org/?v=6.7.4 https://fluscon.com/wp-content/uploads/2022/07/cropped-qtq-95-32x32.png Solenoid Valves and Angle Seat Valve Solutions – Fluscon https://fluscon.com 32 32 Header Tank Solutions https://fluscon.com/en/urunler/fluid-control-pneumatics/dust-collector-products/header-tank-solutions/ Tue, 06 Dec 2022 07:52:46 +0000 http://fluscon.com/?post_type=product&p=1221 General Specifications

Fluscon boasts a full range of dust collector header tanks compliant with the 2014/68/UE directive. Our header tanks stand out for their high performance and durability.

Our expertise and product customisation allow us to meet the requirements of dust collector system and machine manufacturers.

Fluscon mainly provides three types of header tanks:

Stainless Steel Header Tanks (Integral, TF, TL, TD, and Pack series)
Aluminum Header Tanks (Alutank series)
AISI 304 and 316 Stainless Steel Header Tanks (Integral, TF, TL, TD, and Pack series)

]]> Pulse Valve Timer Electronic Systems https://fluscon.com/en/urunler/fluid-control-pneumatics/dust-collector-products/pulse-valve-timer-electronic-systems/ Tue, 06 Dec 2022 07:45:09 +0000 http://fluscon.com/?post_type=product&p=1218

General Specifications and Features

Fluscon provides a wide range of electronic devices to control high-tech dust collector systems.
This range of products can handle any type of system, from the smallest to the largest.

Sequencers / Economisers serve as digital programmers,either providing for the sequential activation of the solenoid valves or through a sensor for automatically measuring the pressure difference only when the filter requires so. This allows for considerable energy savings and extends the durability of the filtering elements.

Various configurations of control units with MODBUS RTU Master + Slave serial system (pneumatic or electrical) allow you to manage the dust collector system avoiding the cost for traditional solenoid valve wiring.

These systems have the following features:

  • Interface with PC/PLC/SUPERVISOR through RS485
  •  Control of parameters, such as differential pressure (optional: temperature, humidity, and header tank pressure).
  •  Continuous dust emission control and recording.
  •  Complete management of compartment filters (cells) for ONLINE and OFFLINE operation.

All control instruments are equipped with a quick and intuitive menu that makes them easy to use, large bright displays that constantly indicate the pressure difference in the filter

]]> Pulse Valve https://fluscon.com/en/urunler/fluid-control-pneumatics/dust-collector-products/pulse-valve/ Tue, 06 Dec 2022 07:43:46 +0000 http://fluscon.com/?post_type=product&p=1216 General Specs of Our Pulse Valves
  • Hytrel Diaphragm for longer life
  • Vent protected by silencer
  • Life >10 million cycle
  • High flow factor for effective cleaning
  • Lower air consumption/ Pulse
  • Pressure Die Cast epoxy coated Aluminium/ SS cast Body
  • Unique profile of the Diaphragm eliminates spring
  • Profiled seat to avoid dust/ particle trapping while closing
]]> Angle Seat Valve Accessories https://fluscon.com/en/urunler/fluid-control-pneumatics/angle-seat-valves/angle-seat-valve-accessories/ Wed, 09 Nov 2022 14:15:56 +0000 http://fluscon.com/?post_type=product&p=1016 Angle Seat Valve https://fluscon.com/en/urunler/fluid-control-pneumatics/angle-seat-valves/angle-seat-valve/ Wed, 09 Nov 2022 14:14:39 +0000 http://fluscon.com/?post_type=product&p=1014 Features of Angle Seat valves:
  • Self-aligning plug ensures zero leaks for every operation
  • Smooth profile with minimum bend ensuring the higher flow
  • Made with corrosion resistive nylon glass filled material along with SS316 fitting makes it is ideal for a corrosive environment.
  • Longer sleeve with special V design gland packings to provide better leak tightness, long life, and avoid metal to metal contact with the shaft.
  • Burnished Shaft for low friction, better gland sealing, and smoother operation
  • Better sealing and cyclic life performance
  • Lean Flow-through Passage for a low-pressure drop and Better flow Characteristics

 

Specification of Angle Seat Valves

  • Life > 10 Million cycles
  • Fast acting upto 1000 cycles per hour
  • Designed to work with absolute vacuum
  • Easily convertible from Normally Close to Normally Open or Double acting to Single acting
  • Modular Design
  • Material is CF8 (SS304 Cast) & CF3M (SS316L Cast)
  • Operator with threaded / NAMUR ports
  • 360 degree rotatable operator
]]> High Pressure Solenoid Valve https://fluscon.com/en/urunler/fluid-control-pneumatics/solenoid-valves/high-pressure-solenoid-valve/ Wed, 09 Nov 2022 14:07:20 +0000 http://fluscon.com/?post_type=product&p=1012 General Specifications of  Fluscon’s Solenoid Valve Range
Pressure range  vacuum to 400 bar.
Operated temperature between  -25 C to 80 C (standard range)
Maximum special range we can go up to  – 196 C to 250 C (Cryogenic to ultra-high temperature)
Orifice  0.3mm to 80mm
Mounting  Any position.
Life  Above 10 million cycles. (special cases even up to 100 Million cycles)
Body  Anodized Aluminium, Brass, SS. (plastics and exotic alloys in special cases)
Seal  NBR, Viton, EPDM, PTFE, Hytrel.
]]> Aggressive Media Solenoid Valve https://fluscon.com/en/urunler/fluid-control-pneumatics/solenoid-valves/aggressive-media-solenoid-valve/ Wed, 09 Nov 2022 14:05:49 +0000 http://fluscon.com/?post_type=product&p=1010 General Specifications of  Fluscon’s Solenoid Valve Range
Pressure range  vacuum to 400 bar.
Operated temperature between  -25 C to 80 C (standard range)
Maximum special range we can go up to  – 196 C to 250 C (Cryogenic to ultra-high temperature)
Orifice  0.3mm to 80mm
Mounting  Any position.
Life  Above 10 million cycles. (special cases even up to 100 Million cycles)
Body  Anodized Aluminium, Brass, SS. (plastics and exotic alloys in special cases)
Seal  NBR, Viton, EPDM, PTFE, Hytrel.
]]> Steam Solenoid Valve https://fluscon.com/en/urunler/fluid-control-pneumatics/solenoid-valves/steam-solenoid-valve/ Wed, 09 Nov 2022 14:03:52 +0000 http://fluscon.com/?post_type=product&p=1008 General Specifications of  Fluscon’s Solenoid Valve Range
Pressure range  vacuum to 400 bar.
Operated temperature between  -25 C to 80 C (standard range)
Maximum special range we can go up to  – 196 C to 250 C (Cryogenic to ultra-high temperature)
Orifice  0.3mm to 80mm
Mounting  Any position.
Life  Above 10 million cycles. (special cases even up to 100 Million cycles)
Body  Anodized Aluminium, Brass, SS. (plastics and exotic alloys in special cases)
Seal  NBR, Viton, EPDM, PTFE, Hytrel.
]]> General Purpose Solenoid Valve https://fluscon.com/en/urunler/fluid-control-pneumatics/solenoid-valves/general-purpose-solenoid-valve/ Wed, 09 Nov 2022 14:02:46 +0000 http://fluscon.com/?post_type=product&p=1006 General Specifications of  Fluscon’s Solenoid Valve Range
Pressure range  vacuum to 400 bar.
Operated temperature between  -25 C to 80 C (standard range)
Maximum special range we can go up to  – 196 C to 250 C (Cryogenic to ultra-high temperature)
Orifice  0.3mm to 80mm
Mounting  Any position.
Life  Above 10 million cycles. (special cases even up to 100 Million cycles)
Body  Anodized Aluminium, Brass, SS. (plastics and exotic alloys in special cases)
Seal  NBR, Viton, EPDM, PTFE, Hytrel.
]]> Valve Manifolds https://fluscon.com/en/urunler/fluid-control-pneumatics/pneumatic-valves-valve-systems/valve-manifolds-2/ Tue, 30 Aug 2022 12:36:51 +0000 http://fluscon.com/?post_type=product&p=769